ARSE - Patent Pending

ARSE  pricing: MSRP $595.00              Call for dealer and distributor pricing.

ARSE technical feature set: 

• Provides hands free operation, no need to remove gloves to search for keys, there are none!

• Provides magical like starting for the owner only. 

• Virtually no chance of drive off theft, unique Identification Code provides security, Over 1 gazillion combinations.

• No keys, no scratched paint just leave credit card sized transponder in wallet or back pocket and press starter button, no codes or numbers to remember.

• High Cool Factor – NO KEYHOLE - invisible starting system for a cleaner look. No keyhole to short out while washing your bike! No wiring harnesses fried!

• No key fob, No need to press buttons on a remote or find and remove a remote control device from a pocket.  Just get on your bike and ride!!!

• Card Key Transponder in your wallet never needs a battery! You can't leave home without it. In addition if you left your wallet in the bar, it will obviously remind you to return there and get your wallet back!

• Simple wiring procedure just like wiring in a key switch.

• This is a ground based system which reduces ground shorts and electrical fires.

• Antenna can be read from as far away as 12 inches from center of antenna. Place antenna inside the seat . The following picture shows the approximate location of the antenna in the seat.

• Hermetically sealed for harsh environments.

• Cannot be defeated with a screwdriver or lock pick.

• Internally, two microprocessor voting system prevents tampering with.

• Works in conjunction with our motorcycle light controller for battery saving, theft deterrence and seamless operation. 

• Can work alone without our light controller, replaces conventional key switch

• All Solid State, no moving parts

• Automatic Over temperature cutoff

• Automatic Over Voltage or Under Voltage shutdown

• 16V Reverse Polarity power protection on outputs

• Operation from 3 Volts DC to 27 Volts DC

• Standby current <5.0uA

• Static Discharge protection to 15 kV DC

• Can supply 100 Amp DC continuous to a relay or motor

• Can supply 100 Amp DC continuous to an ignition system – resistive or inductive loads

• Requires antenna placement in seat foam – 2 inch clearance from metal backing required minimum.

• Key Card replacement and serial number database maintained by BulletProof Electronics to prevent theft of Key Codes.

• Module size 3 1/4" x 2 3/8" x  1"